The EPEVER Tracer AN Collection Solar Cost Controller is a very successful solar controller made for off-grid solar techniques. Based upon multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and system stability for a wide range of photovoltaic (PV) applications.
Important Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Charge Controller engineering for outstanding solar Vitality harvesting. Crucial functions incorporate:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery life.
Liquid crystal display Display screen with serious-time details checking.
Many Load Regulate Modes which include guide and timer.
Complete Electronic Protections in opposition to overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Step Manual to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Be certain all factors are involved: Tracer AN device, temperature sensor, conversation cables, and user handbook.
Validate the design amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a well-ventilated, dry locale near the battery lender.
Safe the Tracer AN controller utilizing the provided mounting brackets.
Manage correct clearance for heat dissipation.
three. Wiring the Photo voltaic Demand Controller
Warning: Often adhere to proper protection protocols and make sure the program is powered off right before connecting factors.
Action 1: Connect the battery terminals into the cost controller (optimistic to good, destructive to detrimental).
Phase 2: Hook up the solar panel array to the PV enter terminals.
Phase 3: Hook up the load terminals if using a immediate load link.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity around the controller by connecting the battery first.
Utilize the Liquid crystal display Exhibit to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Manual, timer, light-weight Handle.
5. Checking and Information Logging
The Tracer AN Collection supports actual-time monitoring utilizing the MT50 remote meter.
Facts could be logged by using the RS485 conversation port utilizing program for example Solar Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Widespread Concerns
Problem one: No Energy Output
Look at battery voltage and connections.
Verify PV panel voltage Click Here exceeds battery voltage.
Challenge 2: About-Voltage Safety
Validate the solar array’s voltage score.
Modify program parameters if necessary.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations inside the menu.
Great things about the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes certain:
Greater Performance: Diminished energy losses for the duration of conversion.
Increased Dependability: Secure overall performance beneath variable hundreds.
For a longer time Battery Lifetime: Constant and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification know-how is definitely an Extraordinary option for optimizing solar power era and increasing battery life. By adhering to the above mentioned set up manual, end users can be certain optimum effectiveness and procedure longevity.